Dolphin Aqua Sea Diamond 10500 gph•MARINE/REEF ABRASIVE PROOF DIAMOND 100 pump
Dolphin Aqua Sea Diamond 10500 1.5hp 115v/230v Type 4 seal
•High head, lowest current draw
•Extreme life harsh reef service
•Motor anti vibration pad and 1.5 new super seal unions included
• Dolphin's highest current, efficiency, pressure, flow, fringe tech center discharge 1.5 union compact pump.
• Supplied corded @ 115v, or wired for 230v (uncorded)
• Indoor or unprotected outdoor use
• New Dolphin fringe tech Wet End with the world's most advanced seals
• Four seal types available through Diamond for pumping the most abrasive marine situations imaginable, while reducing current draw.• Type 4 seal has the lowest friction load of any mechanical seal in the world.
• 3 year factory warranty plus free 10 year factory service guarantee included
• For maximum performance use at least a 2 closed loop return manifold
• 49ft shutoff, 11.25 amps at 115v
In type 3 & 4 Abrasive and Diamond seal, proprietary materials and fringe technology create the lowest friction and highest abrasion proof seal on the market.• This revolutionary seal is standard and only available in Amp Master Diamond Series pumps.•
The Diamond Type 4 Aqua Sea is designed to be maintenance free and pump more water per watt for the life of the motor.
With these improvements, the 1.5 Fringe Tech Wet End draws lower amps and attains higher head pressures and flow rates than any of our previous generation 2 Amp Master pumps, especially when plumbed to 2 manifolds.• The performance improvements combined with the new seal technology make the Fringe Tech 1.5 compact Amp Master a pump that has no equal, more so when plumbed to 2 pipe.
Important Pump Information
All Dolphin Amp Master Pumps are manufactured using one impeller designed to operate on each motor as close to 100% efficiency as possible.• For this reason we do not offer the gimmick of multiple impellers, or smaller impellers, on the same motor running at poor efficiency rates.• Flow rates on all Amp Master pumps may be dialed back with a discharge ball valve to any desired flow rate with no harm to the pump.• Amperage rate will drop as flow rate is reduced to your desired rate.• The most efficient way to plumb any system is to install a ball valve at the discharge union then a tee fitting plumbing a closed loop manifold with return reducing tees where ever you want a flow return.• A closed loop can be any shape or design as long a both ends return to the tee at the ball valve.• This insures even pressure throughout your return manifold.
Type 4 - The Diamond Seal - the hardest, slipperiest, greenest seal made on Earth, with all the advantages of the best seal less pumps made without the disadvantages.•
Diamond Aqua Sea, the following seals are available:
Fringe tech 4 - diamond lower amp max marine/reef abrasive proof